19
Chapter 6 Front Panel Description
6.1 keys description
Figure 6-1 Front panel diagram
LCD
LCD, displaying the current status information and operation tips of the
splicing controller.
0, 1, ...9
Input and output channel selection keys, used for setting the input and output
channels of signals or for the number selection of status calling or saving.
Use method:
Switching mode: Press [NUMBER] key to specify an input + press [SWITCH]
key to switch to the output sel press [NUMBER] key to specify an
press [ENTER] key to confirm switching
Scene call mode: Press [NUMBER] key to specify the calling press
[ENTER] key to confirm calling
SET
Set under the matrix switching mode: 1. Device address: 2. Baud rate; 3.
Input amount; 4. Output amount; 5. Group ID; 6. System language
Set under the splicing mode: 1. Equipment group ID; 2. System language
Use method: Press [SET] key to enter the directory, use [UP/DOWN] to specify
the selected item, press [ENTER] key to enter the selected item, and use
[UP/DOWN] to modify the parameters, and then press [ENTER] key to save
UP
Point to the last item under the directory list mode; Point to the last parameter
value on the interface of option setting parameters
DOWN
Point to the next item under the directory list mode; Point to the next parameter
value on the interface of option setting parameters
SWITCH
The key to switch input to output, used to switch an input channel to an output
channel
Use method: Press [NUMBER] key to specify an input + press [SWITCH] key
to switch to the output sel press [NUMBER] key to specify an
press [ENTER] key to confirm switching
ENTER
Command execution key, to confirm the switching selection
Summary of Contents for 16U
Page 1: ......
Page 11: ...6 2 3 Diagram of the Product Back Panel 8U Figure 2 3 Schematic drawing of rear panel 8U...
Page 12: ...7 2 4 Diagram of the Product Back Panel 16U Figure 2 4 Schematic drawing of rear panel 16U...
Page 13: ...8 2 5 Diagram of the Product Back Panel 24U Figure 2 5 Schematic drawing of rear panel 24U...
