快速安装手册
http://www.whkj.com.cn
010
‐
51655555
●色带 Ribbon
色带更换：
1.如图 1 箭头指示方向打开纸仓盖
2.从打印机头上轻轻取下旧色带盒。注意:请先抬起色带盒的左端,然后再抬起色带盒的右
端,取下色带盒。
3.换新的色带盒。首先将色带盒的右端轻轻放在机头右端的齿轮轴上,左端稍微抬起,不要
放下。如色带盒右端未落到底,请按住色带盒上的旋钮,顺时针方向稍微转动一下,直到
色带盒的右端落到底后再放下色带盒的左端。
4.装上活动盖板，并关上活动纸仓盖即可。
注意:E16 热敏型无需此步骤。我们建议您不定期做好清理。方法是打开纸舱
盖，用棉棒沾少许酒精，轻轻擦拭打印机热敏头，及纸仓上的滚轴。
Ribbon Installation
1. Open the paper cover of printer as shown in the Fig.1.
2. Take down the old ribbon cassette, notice: lift up the left end of the ribbon
cassette, then lift up the right end, and then take down the ribbon cassette.
3. Installing new one: put down gently the right end of ribbon cassette on the
gear wheel in the print head, lift up the left a little, don’t put down, if
the right edge is not down to the bottom, rotate the knob of the ribbon cassette
slightly in clockwise direction as shown in the image, until the ribbon cassette
is down to the bottom, then put down the left.
4. Install the movable cover panel and close the paper cover.（Note: When use E16
thermal printer, no need.to refer this step.) Close the printer cover, and push
the printer head to the original position.
