快速安装手册
http://www.whkj.com.cn
010
‐
51655555
●装纸 Paper Roll
安装步骤：
1.如图 1 所示,箭头位置轻轻扣下，打开纸仓盖。
2.将新纸卷套在纸轴上，并装入打印机纸仓内。纸轴两边固定在卡槽内。拉出一截（超出
一点撕纸牙齿）
，把纸放整齐。
3.接通打印机的电源，按 SEL 键使指示灯灭，并将打印纸送到进纸口，然后按 LF 键使机
头转动，这时看一下纸是否走歪，再按下 SEL 键，或者关上电源（如图 3）
。
4.合上纸仓盖,使打印纸从纸仓盖的出纸口穿出。
Replacing the Paper Roll
1. As the Fig.1shows, open the paper cover follow the arrow.
2. Put the new paper on the paper roller holder, and insert the roller firmly on
the printer. Pull a smart amount of paper out of hatch tooth. Notice the
direction of the paper when use thermal series printer.
3. Power the printer on, then press SEL button, and then press LF button, make
the print head to run, and the paper will come out. Turn off the power.
4. Close the paper cover, make the paper come out of the outlet of the cover.
