BRIGHT 437613, Manual

Page: 4 / 12

4
Display Navigation
When XLED is already in DMX-mode, the DMX start
address is displayed on the left side (Axxx), while the DMX
channel count is displayed on the right side (Cxx).
Use the Up/Down buttons to alter the DMX start address, and press
Enter/Confirm to set the address permanently.
If the XLED is not in DMX-mode, or to change other
settings than the start address, press the Menu button to
access the main menu:
Navigate the main menu with the Up/Down buttons, and
use the Enter/Confirm button to select a menu item. The XLED will return to
its previous state if no new setting or mode has been confirmed within 10
seconds.
DMX start Address
Use Up/Down to alter the DMX start Address (001→512),
then press Enter/Confirm to set the chosen start address
permanently.
O
Setting the DMX start Address will activate “DMX Mode”
DMX Channel count
Use Up/Down to alter the DMX channel count (3ch, 4ch,
6ch, 9ch), then press Enter/Confirm to set the chosen
Channel count permanently.
O
Setting the DMX Channel count will activate “DMX Mode”
Menu/Exit
Up Down
Enter/Confirm