Briggs & Stratton NAX 950V, Manual

Page: 11 / 28

11

Before starting the engine, check the tightness of the entire fuel system, especially the fuel tank, fuel lines,
connectors, filler cap and carburetor area. Do not start the engine if you detect a leaking fuel system as it may
cause a fire.

The device should not be operated in explosive atmospheres, which form flammable liquids, gases or dust. The
internal combustion engine may create sparks which may ignite the dust or fumes.

Do not use the device if you have trouble turning it off. Any device that cannot be turned off is dangerous and must
be repaired.

Do not store the device with filled fuel tank indoors. Gasoline vapors are flammable and dangerous to health.
CAUTION!
Avoid breathing gasoline vapors and exhaust fumes. Gasoline, gasoline vapors and exhaust fumes can cause
poisoning.
Do not operate the saw in closed or poorly ventilated rooms. In case of headache, nausea, hearing or vision
impairment, stop work immediately.
PERSONAL SAFETY

Be foresightful, watch what you do, and use common sense when working with the equipment. Do not use the
equipment when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention during
work can cause serious personal injury.

Protective equipment should be used. Always wear safety glasses. Wearing protective equipment such as a dust
mask, non-slip shoes, helmet or hearing protectors under the right conditions will reduce personal injury.

Before starting the equipment, remove all objects and keys. Leaving the key in the rotating working part of the
machine can cause personal injury.

Do not lean too far. You should always stand firm and balance. This will allow better control in unpredictable
situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.

When working, hold the tool by the additional handles if the tool is equipped with them. Losing control of the tool
carries the risk of injury.

Do not use the device if you have trouble turning it off. Any device that cannot be turned off is dangerous and must
be repaired.
CAUTION! Despite the use of a safe structure by design, the use of protective measures and additional protective
measures, there is always a residual risk of injury during work.
USE AND CARE FOR EQUIPMENT

Do not overload the tool. Use a tool with the power appropriate for the work. Properly selected equipment will
enable better and safer work under the load for which it was designed.

Store the unused equipment out of the reach of children. Do not allow people not familiar with the tool or this
manual to use the equipment. Internal combustion tools and equipment are dangerous in the hands of untrained
users.

Internal combustion tools must be maintained. Check alignment or jamming of moving parts, cracked parts and all
other factors that may affect the operation of the device. If damage is found, the equipment must be repaired
before use. Many accidents are caused by improper repair and / or maintenance of the equipment.

Before using the device, replace all defective, worn and damaged parts. Replace with new warning signs on the
device if they become illegible or damaged.

Warning decals and spare parts can be ordered from NAX service and authorized dealers.

An internal combustion tool, equipment, working tools etc. should be used in accordance with these instructions,
taking into account the conditions and the type of work to be performed. Using the device in a manner not intended
for it may be dangerous.