background image

 

14 

 

 

 

the cutting tool and the whole cutting unit (three-armed knife or head with a cutting line, fastening elements, 
construction of the cutting unit) are in good technical condition; regularly check their attachment, damage and  

wear (depressions, cracks), 

 

safety devices (e.g. cover, housing, handle, levers) are in good technical condition and work properly. 

 

The brushcutter must not be turned on if the cutting tool is not mounted correctly. Danger of dangerous vibrations! 

 

Cutting tools should be sharp and clean. Properly keeping sharp edges of cutting tools reduces the likelihood of 

jamming and simplifies handling. 

 

Before adjustment, cleaning, maintenance, switch off the device and remove the high voltage cable from the spark 

plug. 

 

Do not mow when other people, especially children or pets, are nearby. 

 

Do not start a damaged brushcutter. 

 

Do  not  touch  the  cutting  elements  until  the  equipment  is  switched  off  and  the  motor  of  the  device  and  cutting 

elements do not stop completely. 

 

Do not lift or carry the device with the engine running. 

 

Turn off the brushcutter and remove the high voltage cable from the spark plug when: 

 

you leave the equipment unattended, 

 

before adjusting the lock, 

 

before checking, cleaning or repairing the device, 

 

after hitting with a foreign object, 

 

in the event of abnormal vibrations. 

 

National regulations may restrict the use of the machine. 

 
PREPARATION 

 

When mowing, always wear solid footwear and long pants, do not operate the device without shoes or wearing 
sandals. 

 

Check  carefully  the  area  where  you  will  be  working  and  remove  all  stones,  branches,  wires  and  other  foreign 
objects protruding from the ground. 

 

In high grass, you may not notice obstacles (e.g. stumps, roots), so before starting work with the device, mark all 

obstacles hidden in the grass that cannot be removed. 

 

Always check the cutting elements for wear and damage before use. Replace worn or damaged knives, check the 

cutting line and head for damage. 

 

Check the centrifugal clutch before starting work. To do this, start the brusgcuter, press the throttle lever until the 
brusgcuter engine reaches maximum speed, then release the throttle lever until the engine speed falls to idle. The 
cutting tool should stop after a while. If the cutting tool does not stop, the cash register must be returned for repair. 

 

Before use and after falling or other impacts, inspect the scythe to identify any significant damage that may affect 

safety. 

 

REMEMBER!

  

Do not leave the brushcutter uncontrolled. Never leave running equipment unattended, as unintended use may occur, which 
may cause accidents.

 

 

USEAGE 

 

Mow only in daylight or in good artificial light. 

 

Do not mow during rain, especially during a storm. Avoid mowing wet grass. 

 

Always make sure that your legs stand firmly on the slope. 

 

Come on, never run. Remember to keep a secure position. 

 

Do not mow on excessively sloping slopes. 

 

Do not use the device with damaged covers or housings or without a safety device, e.g. attached covers. 

 

Start the engine according to the instructions, making sure that the feet are away from the cutting tools. 

 

Do not keep your hands and feet near rotating parts. 

 

ATENTION

!  The  device  causes  vibrations  of  the  limbs  during  operation.  The  value  of  vibration  acceleration  is 

provided in the table with rated data. Prolonged exposure of hands to vibration for several months or years, can cause the 
white  toe  disease,  i.e.  a  decrease  in  limb  temperature  caused  by  ischemia.  Symptoms  such  as  tingling,  numbness, 
hypersensitivity to cold should not be underestimated, see a doctor. 

Summary of Contents for NAX 700B





























Reviews: