background image

BRIGGS & STRATTON POWER PRODUCTS OWNER POLICY Effective June 1, 2002

WARRANTY PERIOD*

* The warranty period begins on the date of purchase by the first retail consumer or commercial end user, and continues for the
period of time stated in the table above. "Consumer use" means personal residential household use by a retail consumer.
"Commercial use" means all other uses, including use for commercial, income producing or rental purposes. Once equipment has
been used commercially, it shall thereafter be considered to be in commercial use for purposes of this warranty.
** The gasoline engine and starting batteries are warranted solely by the manufacturers of those products.

WARRANTY REGISTRATION IS NOT NECESSARY TO OBTAIN WARRANTY ON BRIGGS & STRATTON
POWER PRODUCTS EQUIPMENT. SAVE YOUR PROOF OF PURCHASE RECEIPT. IF YOU DO NOT PROVIDE
PROOF OF THE INITIAL PURCHASE DATE AT THE TIME WARRANTY SERVICE IS REQUESTED,THE
MANUFACTURING DATE OF THE EQUIPMENT WILL BE USED TO DETERMINE THE WARRANTY PERIOD.

About your equipment warranty:
We welcome warranty repair and apologize to you for being inconvenienced. Any Authorized service dealer may perform warranty
repairs. Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. For
example, warranty service would not apply if equipment damage occurred because of misuse, lack of routine maintenance, shipping,
handling, warehousing or improper installation. Similarly, the warranty is void if the manufacturing date or the serial number on the
equipment has been removed or the equipment has been altered or modified. During the warranty period, the Authorized service
dealer, at its option, will repair or replace any part that, upon examination, is found to be defective under normal use and service.
This warranty will not cover following repairs and equipment:
• Normal Wear: Outdoor power equipment, like all mechanical devices, needs periodic parts, service and replacement to

perform well.This warranty does not cover repair when normal use has exhausted the life of a part or the equipment.

• Installation and Maintenance: This warranty does not apply to equipment or parts that have been subjected to improper or

unauthorized installation or alteration and modification, misuse, negligence, accident, overloading, overspeeding, improper
maintenance, repair or storage so as, in our judgment, to adversely affect its performance and reliability.This warranty also does not
cover normal maintenance such as adjustments, fuel system cleaning and obstruction (due to chemical, dirt, carbon or lime, etc.).

• Other Exclusions: Also excluded from this warranty are wear items such as quick couplers, oil gauges, belts, o-rings, filters,

pump packing, etc., pumps which have been run without water supplied or damage or malfunctions resulting from accidents,
abuse, modifications, alterations, or improper servicing or freezing or chemical deterioration. Accessory parts such as guns, hoses,
wands and nozzles are excluded from the product warranty. Also excluded is used, reconditioned, and demonstration equipment;
equipment used for prime power in place of utility power and equipment used in life support applications.

If a customer differs with the decision of the Authorized service dealer, he or she may request that the Authorized service
dealer submit all supporting facts to the appropriate Briggs & Stratton or Generac Portable Products LLC Distributor for
review.The Briggs & Stratton or Generac Portable Products LLC Distributor will promptly review the facts and inform the
customer of the final decision.

This warranty does not apply to service by any other entity.

BRIGGS & STRATTON CORPORATION, MILWAUKEE,WISCONSIN, U.S.A.

Equipment ** 

Consumer Use 

Commercial Use 

Pressure Washer 

1 Year 

90 Days 

Water Pump 

 

 

Portable Generator 

2 Years 

 

Home Generator System - Less than 10 KW 

(Includes Transfer Switch, if supplied) 

(2

nd

 year parts only) 

1 year 

Home Generator System - 10 KW or greater 

(Includes Transfer Switch, if supplied) 

3 years or 1500 hours 

3 years or 1500 hours 

LIMITED WARRANTY

“Briggs & Stratton Corporation will repair or replace, free of charge, any part, or parts of the equipment**that are defective in
material or workmanship or both.Transportation charges on parts submitted for repair or replacement under this warranty must
be borne by purchaser.This warranty is effective for the time periods and subject to the conditions provided for in this policy. For
warranty service, find the nearest Authorized service dealer by looking at http://www.briggspowerproducts.com. In the USA and
Canada, a 24 hour hot line, 1-800-233-3723, has a menu of pre-recorded messages.Warranty service may only be performed by a
Briggs & Stratton or Generac Portable Products LLC Authorized service dealer.
THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND
FITNESS  FOR A  PARTICULAR  PURPOSE, ARE  LIMITED TO THE TIME  PERIOD  SPECIFIED, OR TO THE  EXTENT  PERMITTED
BY LAW. ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED. LIABILITY FOR CONSEQUENTIAL DAMAGES UNDER
ANY AND ALL WARRANTIES ARE EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW. Some countries or
states do not allow limitations on how long an implied warranty lasts, and some countries or states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you.This warranty gives
you specific legal rights and you may also have other rights that vary from country to country or state to state.”

Summary of Contents for BPW2400














Reviews: