Not for
Reproduction
Zero-Turn Riding Mower - 48” Mower Deck
2
Left side
shown.
A
B
C
1
2
3
D
A
B
C
Uncrating
1. Pull both transmission release levers (A, Figure 1)
back and then down to lock the transmission release
levers in the disengaged (free-wheel) position. (B)
2. Push down the parking brake lever (C) to release the
parking brake.
3. After ensuring there are no nails or sharp objects on
the bottom skid to puncture the unit’s tires, roll the
unit forward off the bottom skid.
4. After moving the tractor, re-engage the transmissions
by pulling the transmissions release levers up and
forward to the engaged (drive) position (D).
Connect Battery
1. Connect the red positive battery cable (A, Figure 2)
to the positive battery post. Make sure that the cable
boot completely covers the positive terminal, so that
the terminal cannot cover the insulator pad (B).
2. Connect the black negative battery cable (C) to the
negative battery post.
WARNING
BATTERY SAFETY RULES
• Battery acid causes severe burns. Avoid contact
with skin.
• Wear eye protection while handling the battery.
• To avoid an explosion, keep flames and sparks
away from the battery, especially while charging.
• When installing the battery cables,
CONNECT THE POSITIVE (+) CABLE FIRST and
the negative (-) cable last. If not done in this
order, the positive terminal can be shorted to the
frame by a tool.
Figure 1 - Uncrating the Mower
Figure 2 - Connect the Battery
