15
Snow Blade Removal
9. At back of tractor, slide reach mounting arms (
A
, Figure
26) out of the reach support shaft (
B
). Slide the reach
from under the tractor.
NOTE: The reach support shaft (
B
) may be left in
position and will not interfere with the operation of the
lawn mower deck.
B
C
Figure 26
IMPORTANT
Note:
Inspect the snow blade assembly, hitch assembly,
and all component parts for signs of wear or damage. Have
these items repaired or serviced before reinstalling the
snow blade onto the tractor.
6. Turn the front wheels fully to the left.
7. Remove the hair pin (
A
, Figure 25) and slide the latch
rod (
B
) out from the reach (
C
).
CAUTION
Make sure to support the front of the hitch assembly as
is will be loose when the latch rod has been removed.
8. Lift the reach (
C
) off the support fingers (
D
) and place
front end of the reach onto the floor.
B
C
A
B
D
Figure 25
Not
for
Reproduction
