13
Maintenance
Figure 20
Schedule For Normal Care
WARNING
To avoid serious injury, perform maintenance on the
unit only when the engine is stopped and all moving
parts have stopped. Always remove the ignition key
before beginning maintenance or adjustments to prevent
accidental starting of the engine.
General Lubrication
Lubricate the snow blade as shown in Figure 21. Where
an oil can is shown use 30 weight oil. Where a grease
gun is shown, use lithium grease. Lubricate the following
areas:
• Grease the blade pivot.
• Oil the blade lock pawl
• Apply grease to the plastic wear surface above the bell
crank and to the bell crank.
Care Required
Schedule
Clean snow and ice from
the snow blade.
After each use.
Lubricate snow blade.
Every 10 hours or at
least once a year.
Not
for
Reproduction
