©March 2019
Call Toll free at (800) 269-7410
3
INSTRUCTIONS FOR USE
1) The model BRI-IC8000-V bike is designed to be used as a group cycle in fitness studios and health clubs. It has a fixed wheel
driven flywheel and should only be used under professional supervision.
2) Installation – it is important that the BRI-IC8000-V bike is correctly assembled and we recommend that installation and
assembly be carried out by suitably qualified personnel.
3) Handlebar and seat adjustment. It is important that the handlebar and seat are set at the height correct for your body. Ask your
instructor for assistance.
Adjusting the handlebar height - Make sure it is securely tightened and that there is no lateral or vertical movement of the
handlebar. Undo the Quick Release lever which is located in front of main tube. Slide stem tube in upward or downward to the
required height position then re-tighten again.
Adjusting the seat height – refer to above mention.
The stem/sliding tube position can also be adjusted forwards or backwards. Undo the Quick Release lever located
underneath of the bottom of sliding tube.
Slide the handlebar/top sliding tube in forwards or backwards until reach the required position then securely re-tighten the
Quick Release lever.
The seat/slider position can also be adjusted forwards or backwards. Undo the Quick Release lever located underneath of
the bottom slider.
Slide the seat/top slider forwards or backwards until reach the required position then securely re-tighten the Quick Release
lever.
NOTE: there is a safety line engraved on the seat post and handlebar stem. On no
account should the seat post or handlebar stem ever be raised above this line.
4) Pedals and toe straps – your feet should be securely positioned in the toe clips during the exercise. Put your foot as far forward
as you can into the toe-clip and then pull the strap tight.
5) Resistance system- BRI-IC8000-V bike is with durable belt direct drive transmission system, to adjust the exercising resistance
on the completed spinning bike, undo the simply loosen or tighten using control lever to make adjustment. For emergency stop
then push control lever up-ward to the hardest position for stopping the wheel.
6) The BRI-IC8000-V bike should operate on a level surface with no lateral movement. There are height adjust pads located on
either side underneath of front and rear ground tube
Ask your dealer for a detailed maintenance program.
