36
8.5
MDR-Dashboard 2.0 Local Mode
MDR-Dashboard 2.0 User Interface Figure 100
The MDR-Dashboard 2.0 user interface is sub-divided into
several numbered areas as illustrated in MDR-Dashboard 2.0
User Interface Figure 100:
1. Data Source Access (Data Source Figure 120)
2. Graphs Panel
3. Controls Panel
4. Media Playback
5. Map
6. Frame Information
All of the above areas are explained in greater detail in the
following sections. During playback, users can zoom in/out on
the timeline by either using the +/- buttons or the mouse scroll
wheel. The vertical blue line can be positioned to the desired
time by either dragging it or by clicking on the timeline directly.
Frame Information Figure 101
8.5.1
Channel Info
Information about resolution, frame rate and streaming bit rate are shown in all of the 4 or 8 quadrants
– only in full screen view (area 4). On the
top left of each image, users can see the MDR-Dashboard channel number followed by the company number, vehicle number and MDR
channel number (in the below exa
mple) camera 1 shows: “4 3-3 - 4”.
(a) Access full screen mode of a single channel by double-clicking the desired channel. Exit a full screen view by double-clicking again.
(b) Audio playback is limited to one channel at a time, single-clicking a channel will access the audio feed
– a green outer box visually confirms
the current audio feed being accessed.