9
Operation - System active
6
Do not operate whilst driving.
1
Power ON / OFF
To power on, turn the vehicle ignition on with the power cable connected, the
3 LEDs will illuminate. When the recorder has finished starting up, a chime will
sound and the Power/GPS LEDs will illuminate red.
2. If the vehicle ignition is turned off, the recorder will remain on for up to 10
seconds in order to save the last recording file and then turn off with a chime
sounding.
The product does not power off by itself after the vehicle ignition is switched off
when it is connected to permanent power supply. If you want to power off, please
disconnect the power cable from product.
The GPS function can be used to
estimate the driving route and speed.
• With the GPS reception: Green LED
• Without the GPS reception: Red LED
• Power ON: RED LED
• Power OFF: LED off
2
Checking GPS
When the recorder is powered up it will start searching for GPS signals When the
recorder has located its position the Power & GPS LED will illuminate green and
a chime will sound.
