2021 Owner’s Manual Navigator24
BRIG ltd
46
BOAT INSTALLATION ON TRAILER.
A= 600mm (2ft)
B= 940mm (3ft)
C= 3200mm (10ft 6in)
D= 5000mm (16ft 5in)
Permissible deviations: +/- 50mm (+/- 2in)
Maximum transportable mass: 2110kg (4652lb)
Fig.20
Installed on a trailer (or on kell-blocks for storage) the boat should been laying on all surface of the Main loading area
(keel line) (Fig.20).
It is possible to install the boat on the Points of support (at least three points). Point of support (1) must be use always
and any other recommended points may be chosen by you depending on the trailer design.
We do not recommend using other surfaces of the boat hull as support for transport on a trailer. Other surfaces of the
boat's hull (not the keel line) cannot be used as primary reference surfaces. Use them as support against rollover.
Never use a buoyancy tube to support a boat on a trailer or keel-blocks.
Use the front towing U-bolts and rear lifting U-bolts to fix the boat with straps to the trailer.
