2021 Owner’s Manual Navigator24
BRIG ltd
17
Do not use compressors and / or other types of equipment not approved for inflating the boat tube.
The rated pressure value is 0.2 bar (2.9 psi).
Check the tube pressure before every navigation.
Note that when the tube is heated by sunlight, the pressure can increase significantly.
If the tube pressure more than nominal, deflate the tube slightly.
Boat exploitation with pressure more / less than nominal may damage the tube.
Be careful when mooring or navigating near rocky shores.
Tube can be damaged with sharp objects.
Always have on board the means for repairing the punctures and small cuts of the tube.
SERVICING.
The buoyancy tube needs minimal maintenance.
Regularly inspect the tube for damage, abrasions, scoring. If such is found, immediately repair the damage with the help
of qualified specialists.
Avoid spilling gasoline, oil, chlorine-based detergents, solvent cleaners and other aggressive fluids on the tube and
inflation valves. If this happens, immediately rinse the tube with clean water using a soft sponge.
Do not allow dirt or marine growths on the tube. Wash the tube with clean water or use only certified detergents.
