— 24 —
"BRIG" inflatable boats
z
HOW TO OPERATE WITH ANCHOR SYSTEM.
Before beginning to operate with anchor system, carefully study the owner's manual for electric windlass DORADO (Lofran's windlasses), if it is
installed on your boat. Please, respect all requests and follow all instructions stated in above indicated manual.
If you need to drop/cast the anchor by electric motor:
1.Disconnect main battery disconnector.
2.Open the bow anchor hatch. By means of handle (4)(Fig. D9) close the clutch nut (3).
3.Disengage safety pin (7) from chain.
4.Switch on windlass circuit breaker (6)(Fig. D5) and then main battery disconnector.
5.By means of anchor windlass "up" and "down" switch (10)(Fig. D5) drop/cast the anchor.
6.Switch off the main battery disconnector. Close the bow anchor hatch.
If you need to stow the anchor by electric motor:
1.Disconnect main battery disconnector.
2.Open the bow anchor hatch. By means of handle (4)(Fig. D9) close the clutch nut (3).
3.Check that the safety pin (7) is detached from chain.
4.Switch on windlass circuit breaker (6)(Fig. D5) and then main battery disconnector.
5.By means of anchor windlass "up" and "down" switch (10)(Fig. D5) begin to stow the anchor.
6. When the anchor will begin to crawl on a roller, stop windlass electric motor in order to see that the anchor is not swinging and have
occupied correct position. CHECK, THAT THE ANCHOR OCCUPIED CORRECT POSITION (Fig. D10).
7.Continue to stow the anchor, until it will be fixed on a stemhead roller.
8.Switch off windlass circuit breaker (6)(Fig. D5) and then main battery disconnector.
9.Hook safety pin (7)(Fig. D9) to chain. Close the bow anchor hatch.
Summary of Contents for EAGLE E780
Page 44: ...44 BRIG inflatable boats...
Page 45: ...45 Series EAGLE E780 236A 01...
