Replica 1 TE Users Manual
© Briel Computers 2007 page
11
Once you have the power source connected, you can attach your monitor or TV to the replica 1 with a standard
composite video cable. Most modern TV’s have a composite input located on the back of the TV. Plug your
RCA style cable into the back of your TV or monitor and locate the video connector as shown and plug your
cable (not supplied) into the replica 1 (figure 8). While the replica 1 is designed for NTSC composite video,
PAL will work but will be slightly reduced in size on the screen.
Figure 6: Video connector
Next you need to attach a keyboard. You have two choices for keyboards; ps/2 pc style keyboard or an ASCII
keyboard. To use the ps/2 style keyboard locate the ps/2 port on the back edge of the replica 1 and plug your
keyboard into that port (see figure 9).
Figure 7: ps/2 keyboard port
If you are using an Apple 2 or 2+ ASCII keyboard, locate the ASCII keyboard port near the replica 1 logo on
the board and plug your 16pin dip cable into the board. Note that pin 1 is next to the ‘A’ on the ASCII
KEYBOARD label.