Operating instructions
Loading pole with letterbox
Page
6
Technical changes and errors Briefkasten Manufaktur Lippe GmbH E-Mail: [email protected]
Reserved. All contents are protected Werler Straße 60 Phone: +49 (0)5222 807110
by copyright. 32105 Bad Salzuflen Fax.: +49 (0)5222 8071129
www.briefkasten-manufaktur.de
- The national legal requirements for electrical installations, fire protection,
Consider safety regulations and escape routes at the planned installation site. The
observe the applicable national installation regulations.
- If necessary, each Briefkasten Manufaktur Lippe GmbH loading pole with letter box must be
a separate residual current circuit breaker and miniature circuit breaker in the connection
installation
be protected. See requirements for the installation site
WARNING
- Before the electrical connection of the letterbox Manufaktur Lippe GmbH Brief- und
Make sure that the electrical connections are voltage-free.
- Ensure that the correct connection cable is used for the electrical mains connection.
- Die Briefkasten Manufaktur Lippe GmbH Ladestele mit Briefkasten nicht mit geöffneter
Leave the installation cover unattended.
2.5 Safety instructions for commissioning
WARNING
- The commissioning of the Briefkasten Manufaktur Lippe GmbH charging pole with letterbox may
only be
by a qualified installer and/or electrician.
- The required correct electrical connection of the letterbox Manufaktur Lippe GmbH
The charging pole with letterbox must be checked by a qualified electrician before it is put into
operation.
become.
- Before commissioning the letterbox Manufaktur Lippe GmbH charging pole with letterbox on
check for visual damage or defects. The commissioning of a letterbox
Manufaktur Lippe GmbH loading dock with letterbox is not permissible. Any defects found must be
be reported immediately to Briefkasten Manufaktur Lippe GmbH customer service.
3 Plant description
The system described in these operating and installation instructions is a letterbox Manufaktur Lippe
GmbH Ladestele with letterbox of the Designer BIG series.
4 Installation and electrical connection
DANGER
It is essential to observe the safety instructions given in chapter 2, "Safety".
4.1 Requirement for the installation area
