Operating instructions
Loading pole with letterbox
Page
4
Technical changes and errors Briefkasten Manufaktur Lippe GmbH E-Mail: [email protected]
Reserved. All contents are protected Werler Straße 60 Phone: +49 (0)5222 807110
by copyright. 32105 Bad Salzuflen Fax.: +49 (0)5222 8071129
www.briefkasten-manufaktur.de
NOTE
The signal word indicates a technical feature or (in case of non-observance) possible damage to the
product.
Prerequisite for the following action instruction
Instruction for action
Caution
The signal word indicates a hazard with a low degree of risk which, if not avoided, may result in a minor
or moderate injury.
1.5 Warranty and liability
Briefkasten Manufaktur Lippe GmbH accepts no liability for defects and damage resulting from failure
to observe assembly and operating instructions. This exclusion of liability applies in particular to:
Improper use
Repairs by an installation company not commissioned by Briefkasten Manufaktur Lippe GmbH.
and/or electrician
Use of non-original spare parts
Modification of the installations without the consent of Briefkasten Manufaktur Lippe GmbH
● InstallaFon and commissioning by unqualified personnel (no installaFon and/or
Electrician)
Improper disposal after decommissioning
2 Safety
2.1 General
The Briefkasten Manufaktur Lippe GmbH Ladestele with letterbox are developed, manufactured,
tested and documented in accordance with the relevant safety regulations and environmental
regulations. Only use the systems when they are in technically perfect condition.
Faults that affect the safety of persons or the system must be rectified immediately by an installation
and/or electrical specialist in accordance with the nationally applicable rules.
2.2 General safety instructions
CAUTION
- Check the charging pole with letterbox for visual damage before use. In case of damage, contact the
Do not use the charging pole with letterbox.
- The installation, electrical connection and commissioning of the charging pole with letterbox
may only be carried out by a qualified installer and/or electrician.
- Do not remove markings, warning symbols and type plate from loading ramp with letterbox.
- Never use a high-pressure cleaner or similar device on the charging pole with letterbox.
cleanse.
- Ensure that no body parts are positioned between the insertion and/or removal flap.
Become, there is a risk of crushing, shearing, cutting.