Bridgeworks Tamar FCSAS102800, User Manual

Page: 16 / 56

If the Bridge fails to receive a DHCP address, the web interface can be accessed from the default
static IP address by navigating to:
http://10.10.10.10/
or
http://10.10.10.12/
Important: Your host will likely need to be directly-connected to the Bridge
if DHCP is not enabled, and its subnet set appropriately. See Appendix A:
Accessing the Bridge from Windows using a static IP Address for help with
accessing the Bridge web interface without DHCP.
From within your web browser, connect to the Bridge’s web interface using default hostname or IP
address of a connected management interface.
Once you have connected to the web interface on the Bridge you will see the entry page shown
below:
Enter and confirm the new web interface password to be presented with the login screen. The
password must be between 5 and 65 characters and can contain symbols and numbers.
To access the web interface a username and password must be used. The default username is:
• Username: admin
16