Bridgeview BALE KING 8200, Operator'S & Parts Manual

Page: 31 / 63

Bridgeview Manufacturing Inc. 28
Optional Fine Chop Kit (Installation)
This part of the manual will explain how to
install a fine chop kit to an existing machine.
•
Remove cover plate (RIGHT) and the fin
bolts holding it in place.
•
Loosely slide the front (3) and rear (4)
pivots over the ends of the pipe (2).
•
Lift the assembly into the bottom left side of the tub and install the pivots to the tub walls
with 3/8" hardware (7,11) as shown.
•
Install the handle (6) on the handle mount (5) with a spring (13) and 1/2" hardware (8, 12,
and 14). Make sure the lock nut is fully catching the threads.
•
Install the rubber handle cap (15) onto the handle.
•
Install the handle mount to the pipe using 3/8" hardware (7, 11). Make sure that the bar
can pivot freely.
•
Install the fine chop blades (16) to the pipe handle using 1/4" hardware (9,10).