Copyright © Bridgetek Pte Ltd
8
LDSBus Multi Sensor Datasheet
Version 1.0
Document Reference No.: BRT_000360 Clearance No.: BRT#181
6
Configuration, Installation & Application
http://bit.ly/ldsbus-resources
to access the LDSBus Configuration Utility guide on how to
configure the device name, device address and termination settings before using it for your specific
application.
6.1
Connection Diagram
Figure 6 illustrates the connection of the LDSBus Multi Sensor (LDSBus Device) to the LDS Bus. For more
detailed information on device installation, setup, and application, please visit
Figure 6 - LDSBus Multi Sensor to LDSBus - Connection Diagram
Setup Instructions:
1.
Connect the first LDSBus HVT-Junction to any of the LDSBus Host Systems using an RJ45 (CAT5e)
cable.
2.
Connect the configured LDSBus Multi Sensor to the LDSBus HVT-Junction as shown in Figure 6.
3.
If there is more than one LDSBus HVT-Junction, chain them together as shown in Figure 6.
