4. Drill holes. Drill two bottom holes with plastic expansion screw bolts at the two "cross" hole marks on the
sticker and insert the two expansion screw bolts thoroughly into the holes.
[Note]
If threading wires from the top of the mounting surface, a wire outlet hole is also needed at the part of "
Top
Wiring Hole" on the sticker;
If
threading
wires
from
the
profile
side
of
the
device
,
lead
the
cables
out
through
the
U
-
shaped
groove
at the
side of
the
semi-dome base
.
Side Wiring Hole
Top Wiring Hole
Side Wiring Hole
9
