Operation and Safety Manual
™
Model 330IK Manual Gear Driven Gravity Feed Slicer
The Brice Model 330IK manual slicer has been designed for environments where a range of
different foodstuffs and slicing requirements must be met - from individual slices to large
batches. Its features include:
•
Manufactured in anodised aluminium and stainless steel to resist oxidisation and
corrosion;
•
Micrometric thickness control allows for cutting of slices from 0 to 24mm;
•
Power Status light;
•
Low voltage switching for added safety;
•
Last slice device to minimise waste in slicing processed foodstuff stubs;
•
Self-contained and built-in sharpening device with grinding and finishing stones;
•
All bearings are self-lubricating and sealed-for-life;
•
Powerful gear-driven blade;
•
Safety cutout switches for centre plate;
•
Fully-guarded blade and meat tray.
Components of the model range
The following picture illustrates the main components of the slicer.
The Brice Model
330IK Gear
Driven Gravity
Feed manual
slicer
Introduction 1.3
1
ON switch
2
Power indicator
3
OFF switch
4
Thickness control
5
Meat table handle
6
Carriage securing knob
7
Product fence securing knob
8
Product fence
9
Food carriage
10 Meat grip handle
11 Last slice device arm
12 Meat grip/Last slice device
13 Sharpener housing
14 Thickness plate
15 Deburring stone lever
16 Sharpening stone button
17 Blade cover locking knob
18 Slice deflector
1
2
3
4
6
7
8
9
10
5
11
12
14
13
Installing the
slicer
Positioning the slicer
No matter where you put the slicer, you must allow at least as much space as the overall
dimensions indicate. Allowing an additional minimum of 20cm either side of the slicer will
make access for cleaning and maintenance easier.
Make sure that the surface that you intend placing the slicer on is solid, flat, level, dry and
smooth. Ideally, the surface should be between 80cm and 90cm high.
Electrical connections
The slicer connects to a single phase 240 Volts power supply using the power cord supplied.
Simply connect the plug on the end of the power cord to the power point.
16
17
18
15