Loading And Unloading The Trailer
Bri-Mar
106
•
Press and hold the down button (2) to lower the dump body. See
figure 5-9.
•
Release the button when the dump body is fully lowered. Place
dump body controller in the battery box and turn off wireless remote
(if equipped).
•
Close and latch rear doors before moving the trailer.
5.4.5 Hydraulic Components
Do not alter or substitute and hydraulic components on the dump trailer.
The hoist system is designed with each component being compatible
with the safe and reliable operation of the hoist system. Under no
circumstances should you alter the hydraulic pressure or flow rate to the
hoist system.
^ Danger
NEVER
alter or substitute any hydraulic
system component. Death or serious injury
may result.
An altered or component substituted hydraulic
system may malfunction, resulting in the dump
body falling without warning.
NEVER
alter or substitute any hydraulic
system component.
Always have the hoist system repaired or maintained by a qualified
technician.
5.4.6 Body safety prop
The body safety prop supplied as part of the trailer is to be used only
when the dump body is empty. The purpose of the body safety prop is a
back-up to the hydraulic system and will hold the empty dump body in a
raised position while performing maintenance on the hoist, trailer body,
or the trailer itself.
DO NOT
use the body safety prop to support a loaded dump body.
Trailers
Summary of Contents for DT508LP
Page 144: ...Electrical Drawings Bri Mar 138 Trailers...
Page 145: ...Bri Mar 139 9 ELECTRICAL DRAWINGS Trailers...
Page 146: ...Bri Mar 140 Trailers...