26
27
CARE & CLEAnInG
CARE & CLEAnInG
4.
Press the POWER button to turn
the machine off and remove the
plug from the power outlet.
5.
Remove any beans that remain in
the grinding chamber and around
the upper burr.
6.
Remove the upper burr by turning
the handle clockwise.
RE
LE
A
S
E
LO
CK
7.
Using the provided cleaning brush,
thoroughly remove any build-up
of coffee grinds that have formed
around the grinding burrs and
coffee grinds chute. Ensure the
grinds catcher is in place to catch
the loose grinds, then remove and
empty the catcher.
CLEAN THE
GRINDING
BURRS
CLEAN THE
COFFEE
GRINDS CHUTE
8.
Wipe the coffee grinds chute disc
(the entire stainless steel part)
to remove any build-up of coffee
grinds that have accumulated on
the surface. Dry thoroughly.
9.
Replace the upper burr by aligning
the three notches around the upper
burr with the three notches in the
grinding chamber. The upper burr
should sit flush. Turn the handle
counter-clockwise until it clicks
into position.
10.
Replace the bean hopper and lock
into position.
11.
Replace the coffee basket onto the
swing-out door and close. The coffee
grinds chute will rotate back to the
closed position. You may hear a
winding sound, this is normal.
12.
The LCD screen will no longer
display ‘CLEAN COFFEE CHUTE’.
The machine is now ready to use.
CLEAnInG tHE GRInDS CAtCHER
AnD DRIP tRAy
Press the OPEN button to open the
swing-out door. Remove the grinds
catcher located under the coffee grinds
chute and the 2-part drip tray at the base
of the machine. Wash in warm, soapy water.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface. Rinse and
dry thoroughly.
CLEAnInG tHE oUtER HoUSInG
The outer housing and LCD screen can
be cleaned with a soft, damp cloth. Apply
cleanser to the cloth and not the LCD
surface. Polish with a soft, dry cloth.
Cleaning and drying with dry paper towels
or abrasive cloths and cleaners may scratch
the surface.
REMovInG CALCIUM BUILD-UP
Your coffee machine may experience
build-up from calcium and minerals
contained in your water. This ‘scale’ or
mineral build-up will affect the machine’s
performance and coffee quality. It is critical
that scale build-up be removed. How often
you de-scale will depend on the hardness
of your water and the frequency of use.
For best results, Breville recommends
de-scaling once per month in soft water
environments and more frequently in hard
water environments.
If there is an excessive mineral build-up,
the LCD screen will display ‘DE-SCALE’.
Remove the ‘DE-SCALE’ icon by pressing
the SInGLE CUP and CARAFE button
together, then follow these steps:
1. Empty the water tank
•
Press the CARAFE button to select the
number of cups of water that remain in
the water tank.
•
Press the STRENGTH button and
the
and
buttons to select the
‘PRE-GROUND’ coffee setting.
However do not add any coffee to
the coffee basket.
•
Ensure the carafe is empty and the lid
is securely locked. Place the carafe into
position under the drip stop outlet.
•
Press the START | CANCEL button.
•
Once the cycle is complete, discard the
water from the carafe. The water tank is
now empty.
2. De-Scale the Machine
•
Pour white vinegar into the water tank
until the LCD screen displays ‘4 CUPS’.
Then pour cold, preferably filtered
water into the water tank until the LCD
screen displays ‘12 CUPS’. There are
now 4 cups of white vinegar and 8 cups
of cold water in the water tank.
•
Press the CARAFE button to select
‘12 CUPS’.
•
Press the STRENGTH button and
the
and
buttons to select the
‘PRE-GROUND’ coffee setting.
However do not add any coffee to the
coffee basket.
•
Ensure the carafe is empty and the lid is
completely closed. Place the carafe into
position under the drip stop outlet.
•
Press the START | CANCEL button.
•
Once the cycle is complete, discard the
water from the carafe. For best results,
repeat this process.
3. Rinse the Machine
Follow the de-scaling process (Step 2) with
two full tanks of water or until the vinegar is
gone. The machine is now ready to use.
tIP
You may choose to use a domestic
de-scaling agent instead of vinegar and
water. Look for one that is designed for
use with drip coffee machines. Follow
the de-scaler to water proportions
on the de-scaler packaging, however
follow the above procedure.
