background image

8

Using Your Toaster

Toasting crumpets, bagels, burger buns, etc

Your toaster has a special setting for toasting crumpets, bagels, burger buns etc. The 

setting toasts one side while gently heating the other side to ensure pefect results. To use 

this feature correctly, follow these instructions:

1.  This feature works by toasting one side while simply heating the other. Therefore the  

bagel/crumpet must be placed the correct way round in the slot. Place bagels with 

the cut sides facing each other as shown. The cut sides will then be toasted while the 

uncut sides will be gently warmed. 

 

Place crumpets with the top or dimpled sides facing each other as shown. This side 

will be toasted and the other side will be warmed. 

2.  You can toast one, two, three or four bagels/crumpets, but only place a single bagel/

crumpet in each slot. The slot select buttons do not work when you are using the 

crumpet/bagel feature.

3.  For toasting bagels, set the browning control within the bagel setting range. For 

toasting crumpets (which have a higher moisture content), set the the browning 

control within the crumpet setting range. The higher the number selected in each 

range, the darker the bagel or crumpet will be.

4.  Press the CRUMPET/BAGEL switch downwards to select the crumpet/bagel toasting 

feature. The light above the button will illuminate. 

5.  Press the loading handle down until it latches. The bread will be lowered into the 

toaster and toasting will begin.The loading handle will not latch if your toaster is not 

connected to the mains supply. 

 

The lights surrounding the variable browning control will all light up as toasting starts 

and will go out one by one as the toasting cycle completes. The last light will go out 

when toasting has finished and the loading handle will rise. You can lift the loading 

handle upwards beyond its rest position to help you remove the crumpet/bagel.

6.  You can use the lift-and-look feature during toasting to check your crumpet/bagel. 

Simply lift the loading handle up to examine your crumpet/bagel and lower it again to 

resume toasting. If you find your crumpet/bagel is cooked to your preference, press 

the relevant CANCEL switch to stop any further toasting.

7.  Toasting can be stopped at any time by pressing the CANCEL switch corresponding 

to the slot(s) in use. 

Summary of Contents for VTT311

















Reviews: