Breville VTT311, Instructions And Safety

Page: 5 / 16

5
Features and Controls
Browning control
The browning control regulates how much the bread is toasted—in other words, the
colour of the toast. Lower settings produce lighter toast and higher settings produce
darker toast. The 11 lights surrounding the control display the level of browning.
Slot select switch
The slot select switch is used to choose which bread slots will be selected for toasting.
The default setting is for both bread slots to be active.
High lift feature
The high lift feature uses the loading handle to help you to remove the toast. When
toasting has finished, simply lift the loading handle upwards from its rest position to raise
the toast and make it easier to remove. The loading handle will lock in the high lift position
until pressed down again.
Lift-and-look feature
The lift-and-look feature allows you to check the progress of your toast without cancelling
the toasting process. Just lift the loading handle up at any time during toasting and lower
it again to resume toasting. If you find your toast is cooked to your preference, press the
cancel switch to stop further toasting.
Crumpet/bagel toasting switch
This feature is specially designed to toast crumpets, bagels, burger buns, etc. Your
toaster will toast one side while gently heating the other. The light will illuminate when the
CRUMPET/BAGEL switch is on.
Frozen bread switch
The frozen bread switch allows you to toast bread straight from the freezer. Your toaster
will extend the toasting time to allow the bread time to defrost before toasting it. The light
will illuminate when the FROZEN switch is on.
Cancel switch
The toasting cycle can be stopped at any time simply by pressing the CANCEL switch
down.
Toasting progress lights
The toasting progress lights surrounding the browning control will all light up as toasting
starts and will go out one by one as the toasting cycle completes. The last light will go out
when toasting has finished.