5
using your kettle
If this kettle is filled above the maximum level mark, hot water may be ejected
from the spout during boiling. Beware of steam coming from the spout or lid
especially during refilling. Never open the lid when the kettle is boiling.
Before first use
Remove any packaging and promotional material from your kettle and position it on a
stable, secure, dry and level work surface away from the edge.
Before connecting to a power source, make sure your mains supply voltage is the same
as the one indicated on the appliance. Connect the plug to a suitable power outlet and
make sure that the power cord does not overhang the work surface. Excess power cord
can be stored in the power base.
Remove your kettle from the power base. Fill your kettle to the maximum mark and close
the lid.
Place your kettle back onto the power base. Press the BOIL button, allow it to boil
then discard the water. Repeat twice. This will remove any residue left over from the
manufacturing process.
Boiling water
1.
Remove your kettle from the power base and fill it with water. You can fill it through
the spout or by opening the lid. Don’t overfill your kettle and always ensure that there
is sufficient water in your kettle for it to operate correctly. This is approximately 250ml
or 1 teacup full. Place your kettle back onto the power base. Always check the water
level when your kettle is positioned on its power base.
Note
Whenever you remove
the kettle from the power base the display will show
_ _ _
. This is normal.
2. Press the BOIL button. The BOIL button will flash and the kettle will start to boil the
water. The temperature display will show the temperature of the water in 5ºC steps
as it is heated up.
3. Once boiled, your kettle will make a sound and automatically switch off. All lights will
go out except the display which will continue to show the current temperature of the
water in 1ºC steps until the temperature has fallen to 80ºC.
4. To stop the kettle at any time press the BOIL button.
Heating water to a selected temperature
Your kettle will heat water to one of four user-selected temperatures (60ºC, 70ºC, 80ºC or
90ºC). Note that your kettle can only heat water up and not cool it down so if you select a
temperature of 70ºC and the water in your kettle is already hotter, nothing will happen.
1. Fill your kettle with water as required then place it onto the power base.
2.
Press the TEMPERATURE SELECT button to select the desired water temperature
(60ºC, 70ºC, 80ºC or 90ºC). The temperature changes with each press of the button
as follows: 60, 70, 80, 90, 60, 70, 80, 90, etc.
