background image

23

guarantee

Please keep your receipt as this will be required for any claims under this guarantee.
This appliance is guaranteed for 1 year after your purchase as described in this 

document.
During this guaranteed period, if in the unlikely event the appliance no longer functions 

due to a design or manufacturing fault, please take it back to the place of purchase, with 

your till receipt and a copy of this guarantee.

The rights and benefits under this guarantee are additional to your statutory rights, which 

are not affected by this guarantee. Only Jarden Consumer Solutions (Europe) Limited. 

(“JCS (Europe)”) has the right to change these terms.
JCS (Europe) undertakes within the guarantee period to repair or replace the appliance, 

or any part of appliance found to be not working properly free of charge provided that:

• 

you promptly notify the place of purchase or JCS (Europe) of the problem; and

• 

the appliance has not been altered in any way or subjected to damage, misuse, 

abuse, repair or alteration by a person other than a person authorised by JCS 

(Europe).

Faults that occur through, improper use, damage, abuse, use with incorrect voltage, acts 

of nature, events beyond the control of JCS (Europe), repair or alteration by a person 

other than a person authorised by JCS (Europe) or failure to follow instructions for use 

are not covered by this guarantee. Additionally, normal wear and tear, including, but not 

limited to, minor discoloration and scratches are not covered by this guarantee.
The rights under this guarantee shall only apply to the original purchaser and shall not 

extend to commercial or communal use.

If your appliance includes a country-specific guarantee or warranty insert please refer 

to the terms and conditions of such guarantee or warranty in place of this guarantee or 

contact your local authorized dealer for more information.
Waste electrical products should not be disposed of with Household waste. Please 

recycle where facilities exist. E-mail us at [email protected] for further recycling and 

WEEE information.

Jarden Consumer Solutions (Europe) Limited.
Middleton Road
Royton
Oldham
OL2 5LN

UK 

 

 

Summary of Contents for VIN170

























Reviews: