9
Functions
USING YOUR BREVILLE DEHUMIDIFIER
1. To operate the dehumidifier, press the
POWER button.
2. The icon for the last mode used will
illuminate on the display screen or another
mode can be selected.
3. If in Auto mode, adjust the humidity level if
desired (see Humidity Setting).
4. The unit will start to operate within
5 seconds.
5. Press the POWER button again to turn off.
NOTE
The dehumidifier cannot operate if the water
tank is full or is not installed correctly.
SENSAIR™ LIVE HUMIDITY CONTROL
•
Your Breville Smart Dry™ and Smart Dry Plus™
Dehumidifier has a built-in sensor to detect
changes in the humidity level in the air.
•
The SensAir ™ live humidity indicator light
will change colour according to the relevant
humidity (%).
•
The LED screen provides real-time indication
of the relative humidity in the air.
TO SELECT ONE OF THE FOUR
OPERATING MODES:
Press the
MODE button on the control
panel until the corresponding icon flashes on the
display screen.
AUTO MODE
The dehumidifier will operate to reach,
then maintain, the humidity setting.
CONTINUOUS MODE
The dehumidifier will operate on Low
speed until it is manually turned off.
VENTILATION MODE
Circulates ambient air without
dehumidification.
LAUNDRY MODE
Laundry mode operates at a High speed
and a Low humidity setting.
This assists with drying wet clothes faster
when hanging indoors. It is also useful in
drying wet carpets or rugs.
The chosen mode will start within 5 seconds of
selection.
NOTE
This dehumidifier produces heat during
operation which may cause room temperatures
to rise by 1°C to 4°C, especially if used in an
enclosed space.
HUMIDITY SETTING
When the dehumidifier is turned on, the
current humidity level (%) will show on the
display screen and the % icon will illuminate.
This number will adjust as the dehumidifier
operates.
The Humidity Setting allows you to manually
set the relative humidity (%RH) between
30% - 80% (in 5% increments) when the unit is
operating in Auto mode only.
1. To manually adjust the humidity level, scroll
your finger left or right on the Humidity
Setting bar until the desired level flashes,
then illuminates on the display screen.
HUMIDITY SETTING
FAN SPEED
In both Auto and Ventilation modes, the Fan
Speed can be manually selected.
1. Press the FAN SPEED button to select
between Low or High. The light will
illuminate under the selected speed.
LAD300_200_ANZ_IB_B19.indd 9
8/4/19 1:56 pm
