Breville the Scraper Beater LEM250, Instruction Book

Page: 10 / 24

10
ATTACHING THE MIXING BOWL
1. Place the mixer on a level, dry bench
top. The mixer head should be locked in
the horizontal position when lifting and
moving.
2. Lift up the mixer head by placing one hand
on the top of the mixer head and use the
other hand to push down on the tilt release
lever. Pull the mixer head backwards until
it is fully elevated and the mixer head is
locked into place.
3. Insert the bowl into the bowl locking recess
by aligning the notches on the bowl and the
grooves on the mixer base. Turn the bowl
is a clockwise direction to securely lock the
bowl in place.
Assembly
BEFORE FIRST USE
Before using your mixer for the first time,
remove any packaging material and
promotional labels.
Ensure the speed control dial is in the OFF
position, the mixer is switched off at the power
outlet and the power cord is unplugged.
Wash the mixing bowl and attachments in
warm soapy water with a soft cloth. Rinse
thoroughly.
The bowl can be washed in the dishwasher.
When first using your bench mixer, you may
notice an odour coming from the motor. This is
normal and will dissipate with use.
NOTE
Always begin mixing at a low speed, to prevent
splattering. Once ingredients are combined,
increase to the required speed.
NOTE
The speed control dial may need to be turned
past KNEADING slightly for the mixer to start.
WARNING
Never exceed the KNEADING setting when
kneading heavy ingredients like dough.
LEM250_BW_IB_B16.indd 10 26/10/2016 1:01 pm