background image

3

• Do not operate the kettle on a 

sink drain board.

• Do not touch hot surfaces. 

Use the handle for lifting and 

carrying the kettle.

• Do not place anything on 

top of the lid.

• Do not release the lid while the 

water is boiling. Ensure the lid is 

closed whilst boiling.

• Do not press the lid release 

button to open the lid during 

and after operation. This may 

result in boiling water splashing 

from the kettle. Pour out all the 

hot water from the kettle before 

opening the lid to refill.

• Never immerse the kettle base, 

power base, power cord or power 

plug in water, or allow moisture 

to come into contact with 

these parts.

• To prevent damage to the kettle 

do not use chemicals, alkaline 

cleaning agents, steel wool or 

abrasive cleaners to clean the 

inside or outside of the kettle. 

Use a mild cleaning agent with a 

soft damp cloth.

• Do not move the kettle while it is 

switched on.

• Always ensure the START/

CANCEL button is set to 

CANCEL, then turn the power 

off at the power outlet and 

remove the power plug from the 

power outlet before attempting 

to move the kettle, when the 

kettle is not in use and before 

cleaning and storing.

• Use caution when pouring water 

from the kettle, as boiling water 

and steam will scald. Do not 

pour the water too quickly.

• To protect against electric 

shock, do not immerse the kettle 

base, power base, power cord 

or power plug in water or allow 

moisture to come in contact with 

these parts.

• Do not remove the kettle 

from the power base during 

operation. Ensure the kettle has 

switched off after the water has 

boiled or reached the selected 

temperature, before removing 

the kettle from the power base. 

If the kettle is removed from 

the power base during the 

boiling cycle, the kettle will 

automatically switch off.

• Always fill the kettle with water 

between the minimum (MIN) 

and maximum (MAX) marks on 

the water window on the kettle. 

Too little water will result in the 

kettle switching ‘OFF’. Filling 

above the maximum mark 

(MAX) may result in boiling 

water splashing from the kettle.

• The lid should always be locked 

firmly in place in the closed 

position before and during 

use. Do not open the lid during 

operation as this may result in 

boiling water splashing from 

the kettle. Pour all the hot water 

from the kettle before opening 

the lid to refill.

Summary of Contents for TempSet LKE842













Reviews: