8
Ensure the KEEP WARM button is pressed
at any time before or during the heating
cycle and/or within one minute after the
heating cycle has completed.
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional labels attached to your
kettle. It is recommended before first use to fill
the kettle to the maximum level with cold tap
water, bring to the boil by selecting the BOIL
100° button, then discard the water. Your kettle
will only operate when positioned on the power
base. The kettle will automatically switch
off when the water has reached the selected
temperature.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove it from the
powerbase and open the lid by pressing
the lid release button. Fill with the desired
amount of water, then close the lid ensuring
it is locked firmly into place.
NOTE
Always fill the kettle between the minimum
(600ml) and maximum (1700ml) marks on the
water window. Too little water will result in the
kettle switching off due to the safety boil dry
protection. Filling above the maximum mark
(MAX) may result in boiling water splashing
from the kettle.
2. Position the kettle securely onto the power
base. Insert the power plug into a 230V or
240V power outlet and switch the outlet
on. A beep will sound for two seconds. The
START/CANCEL and 100° BOIL button
surrounds will illuminate in white. The
START/CANCEL and 100° BOIL button
surround will automatically switch off after
one minute if the START/CANCEL button
is not selected.
NOTE
If the START/CANCEL button is pressed
without selecting a temperature button, the
START /CANCEL button surround will
illuminate in red and the 100° button surround
will illuminate and the kettle will start heating
to this default setting.
3. Select the desired setting by pressing one of
the four temperature buttons (80°, 90°, 95°,
100°). The selected button and the START/
CANCEL and 100° button surround will
illuminate in white.
NOTE
The KEEP WARM function can be selected
before, during or within one minute after the
completion of the water heating cycle.
4. Press the START/CANCEL button and the
surround will illuminate in red, the selected
temperature button surround will remain
in white and the kettle will start heating.
Do not remove the kettle from the power
base during operation. Ensure the kettle has
switched off after the water has boiled or
the selected temperature has been reached
before removing the kettle from the power
base. If the kettle is removed from the power
base during the KEEP WARM function the
kettle will automatically switch off.
5. When the kettle has heated the water to
the selected temperature, 3 beeps will
sound, the START/CANCEL button
surround illumination will switch to white,
and the selected temperature button and
START/CANCEL button surround will
remain illuminated for 1 minute before
switching off.
6. If the KEEP WARM function has been
selected, the KEEP WARM button surround
will remain illuminated in red, the START/
CANCEL button will no longer illuminate,
the selected temperature button surround
will remain illuminated in white with 3
beeps, and the kettle will maintain the
desired setting for 20 minutes.
