10
•
Press the TIMER button repeatedly until
the desired interval hours are illuminated on
the control panel.
•
For continuous operation, press the
TIMER button repeatedly until there are no
lights illuminated under the timer intervals.
AUTO MODE
•
When in Auto mode, the air purifier will
automatically adjust the speed to help filter
the air based on the sensor reading.
•
To set to Auto, press the POWER button
continuously until the Auto indicator light
illuminates.
•
Press the POWER button or the Fan
Speed button, to turn Auto off and beneath
Auto indicator light will extinguish.
IMPORTANT
Turning the unit On and Off will require
cycling through the Auto mode.
FILTER RESET
•
The On/Filter reset light will blink
continuously indicating that the filter needs
to be replaced.
•
Replace the filter according to the directions
found under Replacing the Filter in this book.
•
Once the filter is replaced, press and hold
the POWER button for 5 seconds to reset
the Filter Reset light.
•
The built-in timer for the filter reset is 4,320
operating hours.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the Instructions
found in the Care, Cleaning & Storage section
of this book.
LAP300_ANZ_IB_C19.indd 10
19/3/19 4:07 pm