BEFORE USING CONTINUED
4
MAKING CAPPUCCINO
5
NOTE:
Do not attempt to fit or remove the milk tank without ensuring the control dial is turned to the
STOP position. Failure to do so may be result in damage to the milk pipe.
8.
Place the cleaning jug under the
cappuccino nozzle.
(figure D)
9.
Plug the unit into the mains and switch on.
Press the power on/off button.
The blue power indicator will light. After
approximately 5 minutes the red light
around the on/off button will illuminate to
indicate that it is ready.
10.
To start cleaning turn the control dial
anticlockwise to the CLEAN/GO! setting.
(figure E)
11.
Clean water is flushed through the machine
into the cleaning jug.
12.
When all of the water from the milk tank has
flushed through, turn the control dial
clockwise to the STOP position. A small
amount of water will continue to be
dispensed.
(figure F)
13.
Remove and empty the cleaning jug.
Your cappuccino maker is now clean
and ready for use.
COFFEE
SHOT
STOP
CLEAN/GO
CLEANING TRAY
COFFEE
SHOT
STOP
CLEAN/GO
CLEANING TRAY
D
A
B
E
F
INFORMATION ON INGREDIENTS AND
RECIPES CAN BE FOUND ON PAGE 14 & 15.
1.
The maximum capacity is 300ml. If the water
tank has already been filled there should be
enough water in the machine to make
approximately 10 cups of cappuccino.
2.
Plug the unit into the mains and press the
power on/off button on the front of the unit
(figure A)
. The blue power on indicator will
illuminate.
3.
Lift the coffee chamber lid and make sure
that the coffee dispenser is in place.
4.
Pour instant coffee granules into the coffee
dispenser.
(figure B)
DO NOT USE POWDERED OR GROUND
COFFEE
Breville IC Instructions 13/11/06 4:29 pm Page 5