12
DESCALING
To maintain it’s performance, your HotCup
™
will require descaling once every three
months or so. You may need to descale your HotCup
™
more frequently if you live in a
hard water area.
By changing the MAXTRA
®
cartridge more frequently, you will need to descale less often.
BRITA
®
recommends to exchange the MAXTRA
®
cartridge every 4 weeks.
1.
Completely remove the lid and remove the filter funnel and filter. Fill your HotCup
™
to the MAX marking on the water chamber and place an empty cup on the drip tray.
Replace the lid. Select a suitable setting for the dispensing control and press the
start button. Wait for the water to be dispensed into the cup.
2.
Add a citric acid-based proprietary descaling product to the hot water in the cup and
stir.
3.
Tip the contents of the cup into your HotCup
™
and close the lid.
4.
Place the empty cup on the drip tray and press the start button.
5.
Wait for the water to be dispensed into the cup.
6.
Discard the water from the cup.
7.
Repeat steps 4, 5 and 6 until your HotCup
™
is empty. Fill your HotCup
™
with fresh
water to the MAX fill level and place an empty cup on the drip tray.
8.
Press the start button and wait for the water to be dispensed into the cup.
9.
Discard the water in the cup.
10.
Repeat steps 8 and 9 until your HotCup
™
is empty. This will rinse any remaining
descaling solution from your HotCup
™
.
11. When your HotCup
™
is completely cleaned, reinsert the filter funnel and filter. Your
HotCup
™
is ready for use again.
Summary of Contents for HotCup VKJ367
