9
Assembly
BEFORE FIRST USE
Before using your juicer for the first time,
remove any packaging material and
promotional stickers and labels. Ensure the
appliance is switched off at the power outlet
and the power cord is unplugged.
Wash the filter bowl surround, Nutri Disc™,
juicer cover, Froojie
®
Disc, Froojie
®
Insert, food
pusher, pulp container and juice jug and lid in
warm, soapy water with a soft cloth. Rinse and
dry thoroughly. The motor base can be wiped
with a damp cloth. Dry thoroughly.
FOR USE WITH JUICE EXTRACTOR
1. Place the motor base on a flat, dry surface
such as a bench top. Ensure that the motor
base is switched OFF at the control panel,
then switch the appliance off at the power
outlet and unplug the cord.
2. Place the filter bowl surround on top of the
motor base.
3. Align the arrows at the base of the Nutri
Disc™ with the arrows on the motor drive
coupling and push down until it clicks
into place. Ensure the Nutri Disc™ is fitted
securely inside the filter bowl surround and
onto the motor base.
4. Place the juicer cover over the filter bowl
surround, positioning the feed chute over
the juice disc and lower into position.
5. Raise the safety locking arm up and locate
it into the two grooves on either side of the
juicer cover. The safety locking arm should
now be in a vertical position and locked into
place on top of the juicer cover.
Summary of Contents for Froojie Juice Fountain BJE520
Page 1: ...the Froojie Juice Fountain Instruction Book BJE520 ...
Page 27: ...27 ...
