Breville Easy Glide, Manual

Page: 8 / 16

Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior
of your iron because they will damage the surface.
Cleaning the Soleplate on your Iron
After each use, allow iron to cool fully before wiping the soleplate with a damp soft cloth.
If polyester has burnt to the soleplate, iron a damp cotton cloth while hot. If necessary,
allow unit to cool fully and wipe over the soleplate with a soft cloth and a small amount of
methylated spirits. Remove the methylated spirit with a damp cloth. Ensure soleplate is
dried thoroughly.
Cleaning the Steam Holes
To remove build-up from the steam holes which may affect steam performance, use a
cotton wool tip moistened in methylated spirits. Wipe over with a damp cloth.
To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry. Ensure
the soleplate is then dried thoroughly.
Putting your Iron Away
Set the steam control to the no steam position (0).
Turn the power off and remove the plug from the power outlet.
When the soleplate has cooled, empty remaining water from the tank.
Storage
Always store the iron on its heel rest, allowing to cool for 30 minutes.
Do not store the iron with the soleplate facing down, or in the carton.
Do not wrap the cord around the soleplate. The cord can be neatly wrapped around
the heel of the iron.
1.
2.
3.
1.
2.
3.
care and cleaning