background image

2

product safety

This product can be used by children aged 8 years and above, 

and persons who require supervision, provided:

• 

they are familiar with the hazards associated with the 

product, and,

• 

they receive instruction by a competent person on how to 

safely use the product.

Children must not play with the product. Cleaning and user 

maintenance must not be done by children unless they are 

supervised.
Keep the appliance and its cord out of reach of children less 

than 8 years old when it is switched on or cooling down.
The appliance must not be left unattended when it is 

connected to the mains supply.
The appliance must be unplugged from the mains supply 

socket before filling the water tank with water.

Always use the appliance on a stable, secure, dry and level 

surface. When placing the appliance on its stand, ensure that 

the surface on which the stand is placed is stable.
Do not use the appliance if it has been dropped, if there are 

any visible signs of damage or if it is leaking.
If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualified persons in 

order to avoid a hazard.

Summary of Contents for Easy glide 2200W

















Reviews: