![background image](http://html.mh-extra.com/html/breville/donna-hay-bem800dh/donna-hay-bem800dh_instruction-booklet_2809551008.webp)
14
15
ASSEMBlY AND OPERATION OF YOUR WIzz
®
PlANETARY MIxER continued
If this error occurs, turn the speed control
dial to the ‘Off” position, switch the appliance
off at the power outlet and unplug the cord.
Remove some of the ingredients in the
mixing bowl and then restart the mixer.
DISASSEMBlING THE MIxER
When mixing is complete, turn the
1.
speed control dial to the ‘Off/Stand by’
position, switch the appliance off at the
power outlet and unplug the cord.
Remove splash guard if assembled.
2.
Separate pour sput then slide main ring
out of position.
Raise the mixer motor head by
3.
depressing the tilt back button and lift
the mixer motor head up until it tilts
back and locks into the open position.
Remove the beater/dough hook/whisk
4.
attachment by holding the mixer motor
head and pressing the attachment
upwards on the spindle. Turn the
attachment anticlockwise to release it
from the pin on the spindle.
Use a soft plastic spatula to remove
5.
mixture from the beater, dough hook or
whisk attachment.
NOTE: When lowering or lifting the mixer,
always support the motor head with your
other hand to prevent from free-falling.
Remove the mixing bowl from the
6.
indented bowl locking recess of the
mixer Base and turn anti-clockwise
until the bowl releases. Use a soft
plastic spatula to remove mixture from
the mixing bowl.
Lower the mixer motor head by
7.
depressing the tilt back hinge button
and pushing the mixer motor head
down until it locks into the horizontal
(closed) position.
WARNING: AVOID CONTACT WITH
BEATER/DOUGH HOOK/WHISK
DURING OPERATION. KEEP HANDS,
HAIR, ClOTHING, SPATUlAS AND
OTHER UTENSIlS AWAY FROM
BEATER/DOUGH HOOK/WHISK TO
PREVENT PERSONAl INJURY OR
DAMAGE TO THE MIxER.
PAUSE MODE
While mixing, at any stage, you can rotate
the control dial to the “pause” setting. This
will turn the motor off and “pause” the timer.
This enables you to assess the mixing
progress or add additional ingredients
without effecting the timer.
For example, if you are mixing using the
‘count-up timer’ mode, you can rotate the
control dial from one of the mixing speeds
to “pause”. The mixer motor will stop and
the timer will “pause”. Once ready, you can
rotate the dial back to one of the mixing
speeds, the timer will continue to count-
up from the exact time it was paused.
Alternatively, if you have turned the mixer to
“pause” you can then reset the timer to 0:00
by rotating the dial to “Off” position.
If using the “pause” function in ‘count-
down timer’ mode, you can suspend the
timer at any stage during the count-down
process by rotating the control dial to the
“pause” setting. To continue mixing in the
‘count-down timer’ mode, simply rotate the
dial back into one of the mixing speeds or
alternatively to the “Off” position to reset the
timer to 0:00.
THERMO CUT-OFF – TEMPERATURE
OVERlOAD
The mixer is equipped with a self-resetting
safety device which safeguards against
overheating the motor with excessive
loads. If overheating occurs, the mixer
will automatically activate the overheating
protection device and the motor will switch
itself off. Should the mixer go into this mode,
the LED indicator band will flash and the
error message “E2” will flash on the LCD
screen and the buzzer will “beep” 3 times. .
If this error occurs, turn the speed control
dial to the ‘Off’ position, switch the appliance
off at the power outlet and unplug the cord.
Wait at least 15 minutes before restarting
the mixer.
ElECTRONIC PROTECTION CUTOFF –
CURRENT OVERlOAD
The mixer is equipped with an electric
protection cutoff and will automatically
stop operating if the motor is stalled or
overloaded. This is normally a result of
excessive ingredients being processed
at one time. Should the mixer go into this
mode, the LED indicator band will flash and
the error message “E1” will flash on the LCD
screen and the buzzer will “beep” 3 times.
ASSEMBlY AND OPERATION OF YOUR WIzz
®
PlANETARY MIxER continued
NOTE:The maximum time displayed on
the timer is 9:59 (nine minutes, fifty-nine
seconds). The mixer will automatically
switch Off at 9 minutes 59 seconds. The
control dial needs to be rotated to the
“Off” position to reset the timer and to
continue mixing.