Breville BJE820, Instruction Booklet

Page: 19 / 52

18
OPERATING yOUR BREvILLE PROdUCT
USING THE PUREE ExTRACTOR
When using the puree extractor puree will
flow into the juice jug. There will be no pulp
extracted into pulp container.
NOTE 1
SELF-RESET OVERHEATING
PROTECTION
The Breville juice processor also fitted
with a self-resetting safety device
which safeguards against overheating
on the motor with excessive loads.
If overheating occurs, the juicer will
automatically activate the overheating
protection device and the motor
will switch itself off. If this occurs,
the light surrounding the START/
STOP button will flash red. When the
overheating protection is activated,
unplug the juicer from power outlet
for at least 15 minutes to allow the
unit to cool. Then plug juicer into the
power outlet and use as normal.
NOTE 2
ELECTRONIC PROTECTION
The Breville juice processor will
automatically stop operating if the
motor is stalled. This is an electronic
safety feature. Either too much food
is being processed at one time or
the pieces are not small enough. Try
trimming food, cutting food into
smaller pieces of even size and/
or processing a smaller amount
per batch. If this occurs, the light
surrounding the START/STOP button
will flash red. To continue juicing, turn
the power OFF at the power outlet,
clear the feed chute, finally turn the
appliance back on by pressing the
START/STOP button to ON.
NOTE 3
OVERLOAD PROTECTION BUTTON
The Breville juice processor is fitted
with a safety device which safeguards
against overloading with excessive
loads. If this occurs, juicer will
automatically activate the overload
protection button and the unit will
switch itself off.
If this occurs turn the power OFF at
the power outlet and allow the unit
to cool. Then press the overload
protection button found on the bottom
of the motor base. The safety device
will then be reset and the Breville
juice processor is ready for use again.