TO ASSEMBLE THE CRAZY SNOW
Step 1
Insert the ice stirring paddles
into the ice shaving blade
body. Insert knob and screw
in a clockwise direction to
lock ice stirring paddles
into place.
Step 2
Align front of lid housing
with front of ice shaving
blade body and firmly push
down the rear of the lid
housing until it locks
into position.
Step 3
Carefully insert ice shaving blade into the front of the
ice shaving blade body. Insert knob and screw in a
clockwise direction to lock in place.
USING THE CRAZY SNOW
Step 1
Ensure the Crazy Snow is completely and properly
assembled (following the assembly instructions).
The Crazy Snow will only operate when correctly
assembled. This is a safety feature.
Step 2
Lift the lid and place ice cubes into the Crazy Snow.
Step 3
Place the ice collector into position under the ice
shaving blade to catch the shaved ice.
Step 4
Insert the plug into a 230/240V power outlet and
turn the power on.
Step 5
Depress the lid marked with ‘PUSH’ to start the
appliance. Keep the lid depressed to operate.
Release the lid to stop the Crazy Snow.
NOTE!!
Too many or too large ice cubes will cause the
Crazy Snow to stall or not work at all. Remove
some of the ice cubes or use smaller ice cubes
and continue the process.
OPERATING YOUR BREVILLE CRAZY SNOW
NOTE!!
The ice shaving blade body can be rotated in
a clockwise direction. The Crazy Snow will not
operate unless the ice shaving blade body is
rotated anticlockwise back into the correct position
and the lid housing is locked into place. This is a
safety feature.
