10
OPERATING yOUR BREvILLE FREEZE & MIx
2.
Place the freezer bowl into the bowl
locking recess of the mixer base and
turn the bowl clockwise until the bowl
locks securely into place.
NOTE
To remove or insert the freezer bowl,
the mixer motor head must be raised
and locked into the open position.
ATTACHING THE PAddLE TO THE
MIxER MOTOR HEAd
NOTE
The Freezer bowl must assembled
and used immediately after
removing it from the freezer to
prevent it from thawing.
1.
Ensure the mixer motor head is in the
raised/open position. Align the groove
in the top of the Scraper Paddle with the
locking pin on the spindle extending
down from the mixer motor head.
2.
Push the scraper paddle upwards and
turn clockwise until it locks securely
onto the locking pin on the spindle.
3.
Lower the mixer motor head by
depressing the tilt back button and
gently pushing the mixer motor head
down until it locks into the horizontal
(closed) position.
ATTACHING THE SPLASH GUARd
TO THE MIxER MOTOR HEAd
1.
To attach the splash guard, place bowl
on mixer, make sure the motor head is in
the up position, place the plastic splash
guard on to the bowl, so that the groove
lip of the guard sits inside the groove of
the freezer bowl.
USING THE FREEZE & MIx
1.
Ensure the speed control dial is set to
the ‘Off’ position, plug the cord into a
220-240v power outlet and switch the
power ‘ON’ at the power outlet. The
illuminated LED speed indicator band
will flash and the Count Up/Down timer
will display “0:00.” The Freeze & Mix is
now ready to be used.
2.
Follow directions in the recipe for the ice
cream or frozen desert being prepared.
3.
Turn the mixer on the slowest speed
setting, marked “folding/kneading” on
the LED speed indicator band before
adding any ingredients to the bowl.
Once the freezer bowl has started to
rotate add the mixture through the
pouring spout of the splash guard and
into the freezer bowl.
NOTE
Pouring the mixture into the freezer
bowl before starting the mixer may
cause the mixture to freeze prematurely.
4.
Mix the ice cream/frozen desert until it has
reached the desired consistency. Follow the
table below for mixing guidelines.
NOTE
If adding mix-ins (chocolate pieces,
nuts etc) to ice cream/frozen deserts,
it is suggested that these be added to
the mixture at least 15 minutes after
the churning processes has begun.
Summary of Contents for BIA500
