8
Disassembling your blender for
cleaning, care and storage
Always ensure the Blender is off by turning the dial to
the ‘Off’ position. Then switch off at the power outlet
and unplug the power cord.
Remove the blender jug from the motor base by
grasping the handle and lifting the jug in an upward
direction.
1.
.
Operating Your Breville Power Blender
continued
Select the required speed (1 to 12) by turning the dial to
the corresponding speed.
Operate the blender only for the appropriate amount of
time required – do not over blend.
PULSE
- For ingredients that require short bursts
of power, like crushing ice, press the
‘Pulse/Ice
Crush’
button. The pulse feature can be used while
the blender is in the ‘Off” position. When pressed,
the pulse button will illuminate and will continue to
operate until it is released.
At the end of use, always ensure the blender is
turned to the ‘off’ position. Then switch the appliance
off at the power outlet and unplug the cord. Ensure
the motor and blades have completely stopped
before attempting to move the appliance, or when
the blender is not in use and before disassembling,
cleaning and storing.
7.
8.
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE BLENDER wHILST THE MOTOR IS RUNNING.
NOTE
To stop blending at any time, return the dial to the
‘Off’ position.
The speed can be changed at any time during the
blending process by rotating the dial to the desired
speed.
NOTE
The maximum amount of ice cubes the blender
can blend at any one time is 1 standard ice tray
or 250g.
NOTE
Use the ‘Pulse’ button when the food that is being
processed is too thick or coarse to circulate within
the blender jug.
NOTE
During the blending process, ingredients may stick
to the side of the blender jug. To push the food back
onto the blades, turn the blender to the ‘off’ position,
switch off at the power outlet and remove the
power cord.
Remove the lid and use a plastic spatula to scrape
down the sides of the jug. Replace the lid before
recommencing blending.
NOTE
If any moisture or liquid appears on top of the motor
base during blending, turn the blender to the ‘off’
position, switch off at the power outlet and remove
the power plug. Remove the blender jug. Wipe the
motor base immediately with a dry cloth or paper
towel to absorb the liquid. Check the blade assembly
is correctly assembled.
BBL410_IB_FA.indd 8
13/7/09 1:29:49 PM
