4
Breville recommends safety first
At Breville we are very safety conscious. We design and manufacture consumer products
with the safety of you, our valued customer, foremost in mind. In addition we ask that you
exercise a degree of care when using any electrical appliance and adhere to the following
precautions.
Carefully read all instructions before operating the
Breville Blender for the first time and save for future
reference.
Remove and safely discard any packaging material
and promotional labels before using the blender for
the first time.
To eliminate a choking hazard for young children,
remove and safely discard the protective cover fitted
to the power plug of this appliance.
Do not place the blender near the edge of a bench
or table during operation. Ensure the surface is
level, clean and free of water and other substances.
Vibration during operation may cause the appliance
to move.
Do not use the blender on a sink drain board.
Do not place the blender on or near a hot gas or electric
burner, or where it could touch a heated oven.
Handle the blender and attachments with care
– remember the blades are razor-sharp and should be
kept out of the reach of children.
Care shall be taken when handling the sharp cutting
blades, emptying the bowl and during cleaning.
Always ensure the blender is completely assembled
before operating. The blender will not operate unless
properly assembled.
Do not use attachments other than those provided
with the blender.
Do not attempt to operate the blender by any method
other than those described in this booklet.
Always secure the blade assembly onto the blender
jug before attaching to the motor base.
Ensure the Speed Selection dial is in the ‘Off’ position
and the blender is switched off at the power outlet
and the power cord is unplugged before attaching the
blender jug.
•
•
•
•
•
•
•
•
•
•
•
•
•
Always operate the blender with the blender jug lid
in position.
Keep fingers, hands, knives and other utensils away
from moving blades.
Do not place hands or fingers into the blender jug
unless the motor and blades have come to a complete
stop. Ensure the Speed Selection dial is in the ‘Off’
position and the appliance is switched off at the
power outlet and the power cord is unplugged before
removing the lid from the blender.
Ensure the motor and the blades have completely
stopped before disassembling. Ensure the Speed
Selection Dial is in the ‘Off’ position and the appliance
is switched off at the power outlet and the power cord
is unplugged from the power outlet before attempting
to move the blender, when not in use, if left unattended
and before disassembling, cleaning or storing.
Care should be taken when removing the food from the
blender jug by ensuring the motor and the blades have
completely stopped before disassembling. Ensure the
Speed Selector Dial is turned to the ‘Off’ position,
the appliance is switched off at the power outlet and
unplugged, before removing the lid from the blender
jug. The blender jug should then be removed from the
motor body and the food carefully removed before
attempting to remove the blade assembly.
Do not operate the blender continuously for periods
longer than 2 minutes on any setting. None of the recipes
in this book are considered a heavy load. If the blender is
operated continuously for too long, it should be allowed
to rest for 25-30 minutes before recommencing.
Allow the motor to rest for 1 minute between each use.
Do not operate the appliance continuously with heavy
loads for more than 10 seconds.
Do not process hot or boiling liquids – allow liquids to
cool before placing into the blender jug.
•
•
•
•
•
•
•
•
•
IMPORTANT SAFEGUARDS FOR YOUR BREVILLE POwER BLENDER
BBL410_IB_FA.indd 4
13/7/09 1:29:45 PM
