background image

13

REMOVAL OF MINERAL DEPOSITS

Mineral deposits from hard water can build up 

in the water tank and internal tubes. If these 

deposits are not removed, the brew time will be 

extended.

To remove mineral deposits

1.  Fill the water tank to the maximum mark 

with 2/3 cold tap water and 1/3 white 

vinegar.

2.  Ensure the filter holder is firmly positioned 

into place. Close the water tank lid.

3.  Position the carafe, with the lid on, on the 

hot plate and switch the coffee maker on. 

Allow the mixture to drip through the 

machine until the cycle is complete.

4.  Once the cycle is complete empty the carafe 

and refill the water tank with water. Place 

the carafe back into position on the hot 

plate.

5.  Switch the coffee maker on and allow the 

fresh water to drip through. Once the cycle 

is complete, switch the machine off and 

empty the carafe. Mineral deposits will have 

been removed from the water tank and 

internal pipes.

STORAGE

• 

Press the ON/OFF button to off, switch off at 

the power outlet and unplug.

• 

Ensure all water has been removed from the 

coffee maker.

• 

Wash the mesh filter basket and holder, 

carafe and lid in warm, soapy water. Rinse 

and dry thoroughly.

• 

Replace all parts back into position in the 

coffee maker and close the water tank lid.

• 

Store upright on the bench top or in a 

cupboard.

CARE & CLEANING

Before cleaning ensure that the ON/OFF  

button is in the off position. Switch off at the 

power outlet, unplug the power cord and allow 

the coffee maker to cool. 
The stainless steel mesh filter basket, filter 

basket holder, scoop and carafe can be  placed 

in the dishwasher or washed in warm soapy 

water  then rinsed and dried thoroughly. The 

outer housing can be cleaned with a soft, damp 

cloth (do not use abrasive agents or cloths 

which can damage the surface). The warming 

plate can be wiped with a clean damp cloth 

when necessary.

NOTE

Do not try to clean the inside of the water tank 

with a cloth, this will leave a residue of lint and 

may clog your coffee maker. Just rinse with 

cold water periodically.

Care, Cleaning  
& Storage

Summary of Contents for Aroma Style Electronic LCM700

















Reviews: