Breville Aroma Style Electronic LCM700, Instruction Book

Page: 10 / 16

10
Keep Warm
10. The hot plate will keep the coffee in the
carafe hot for two hours as long as the
coffee maker remains switched on.
11. Always switch the coffee maker off when
the carafe is empty or when you no longer
want to keep the coffee hot.
NOTE
There are two drain holes on the back of the
water tank to prevent exceeding the capacity of
the coffee maker. If too much water is added it
will flow from these holes down the back of the
coffee maker.
WARNING
To avoid the filter basket overflowing, the
carafe must fit securely into the coffee maker
hot plate, with the lid on at all times. If not
properly positioned on the hot plate, hot water
or hot coffee may overflow. Do not open the
water tank lid during the brewing cycle as hot
steam could cause injury.
WARNING
If water/coffee is not dripping from the coffee
maker, immediately turn off the coffee maker
by pressing the ON/OFF button, switch off at
the power outlet, unplug and wait 10 minutes
before opening the water tank lid and checking
the filter basket. The coffee maker becomes
very hot during the brewing cycle. Please
handle with extreme care.
DELAY BREW - PROGRAMMING YOUR
COFFEE MAKER
The clock must be set to the time of day for the
automatic operation of the coffee maker. See
'Setting the Clock' section in this book.
Delay brew allows you to pre-set the timer
program to automatically brew coffee at a later
time within a 24-hour period.
TO SET THE DELAY BREW OPERATION
1. Press the ‘PROGRAM’ button. The ON/
OFF indicator light will flash in green to
indicate brew time is being selected and
“AM 12:00” will flash on the LCD screen.
2. Select the time you want the coffee to start
brewing by using the ‘HOUR’ button, then
the ‘MINUTE’ button, following the same
instructions for setting the clock.
3. To confirm your delay brew start time,
press the ‘DELAY BREW’ button.
The ON/OFF button will solidly illuminate
green and the pre-set time will be displayed
for a few seconds on the LCD display. It will
automatically return to the current time
after a few seconds.
4. After setting the delay brew start time,
prepare coffee following the directions in
‘Brewing coffee’ section of this book.
5. Press the ‘DELAY BREW’ button. The green
ON/OFF light will illuminate.
6. Your coffee maker will automatically begin
brewing at the pre-set time. When the brew
cycle begins, the ‘ON/OFF’ indicator light
will illuminate red to indicate the coffee
maker is in operation.
NOTE
To use the delay brew function, the coffee
maker must be powered on and not switched
off at the power outlet. If the power is switched
off, the time and delay brew program will need
to be set again.
NOTE
If you do not want to serve immediately, the
coffee can be kept warm on the warming plate.
The coffee maker will automatically turn off
after 2 hours, the ON/OFF indicator light
will illuminate red if it has not been manually
turned off at the completion of brewing.