background image

11

The maximum amount of ice cubes the 

blender can blend without liquid in the jug 

at any one time is 1 standard ice tray or 

250g.

Auto Clean

Use to remove most of the ingredients off 

the blender walls and blades. Add 2 cups 

warm soapy water and press the clean 

button. For harder to clean, sticky or thick 

ingredients, add ½ teaspoon of dishwashing 

detergent for extra cleaning power. For 

best results, clean the blender jug this way 

immediately after use. The Auto Clean 

function only cleans the blender jug. It 

doesn't clean the juicer.

MANUAL OPERATION

Speed Control Dial

Blending 

Turn the Speed Control Dial clockwise to 

select one of 10 speed settings from a slow 

STIR through to a very fast PULVERIZE. 

The timer will start to count up, and 

blending will stop when it reaches '2:00'.
Blending can be paused by pressing pause 

button. Press pause button again to cancel, 

or turn dial to resume blending from  

Speed 1.  

To stop blending, turn the Speed Control 

Dial anticlockwise back to READY or press 

ON|OFF button.

JUICING

Wash your selection of fruit and vegetables 

to be juiced. Most fruit and vegetables such 

as apples, carrots and cucumbers will not 

need to be cut or trimmed to size as these 

will fit whole into the feed chute. Ensure 

vegetables such as beets, carrots etc. have  

all soil removed, are washed well and 

trimmed of leaves before using. 

1.  Plug the power cord into your 

220–240V power outlet. 

IMPORTANT

Do not load feed chute with produce before 

the Juicer has reached the selected speed. 

Turning the Juicer On

 

Turn dial to desired speed setting. Use lower 

numbers (1–5) for soft fruits and vegetables 

and higher numbers (6–10) for hard fruits 

and vegetables. See Speed Selector Guide 

table on the next page to match speed and 

produce type for maximum yield. "Low" 

range, while it may not maximise yield 

of some produce, allows you to extract 

juice at a significantly lower noise level.  

2.  With the motor running, place food into 

the feed chute and use the food pusher 

to gently guide food down. To extract 

the maximum amount of juice, always 

push the food pusher down slowly.

3.  Full Blender Jug 

You can keep juicing until the jug is filled to 

MAX. level. 

WARNING

Never use fingers, hands or utensils to push 

food down the feed chute or to clear the feed 

chute. Always use the food pusher provided. 

 

CAUTION:

 

sharp blades

The stainless steel filter basket contains 

small sharp blades to cut and process fruit 

and vegetables. Avoid touching the blades 

when handling the filter basket.

BJB815_ANZ_IB_A19.indd   11

4/6/19   11:12 am

Summary of Contents for 3X Bluicer Pro BJB815

















Reviews: