Brevetti 905EVO2, Manual

Page: 10 / 72

10
ENGLISH
2.2 Flat surface cutting (90°)
• Position the cutting guide and lock it by fully
pressing in the knobs.
• Correct fastening of the blade will help you make
repeated and more precise cuts.
• Advance at a speed that is proportional to the
blade’s cutting capacity.
That way you will be able to ensure that no ma-
terials come off that could cause accidents or
injury.
2.3 45º cutting (jolly)
• Place the movable surface at 45º and lock it us-
ing the positionable handles.
• Position the cutting guide about 2 mm from the
diamond blade and lock it by fully pressing in the
knobs.
• Position the tile with the enamel surface facing
the work surface and make sure that the dia-
mond blade does not come into contact with the
enamel of the tile.
• If necessary, correct the position of the cutting
guide.
2.4 Switching on
• When the machine is used outside, only use ex-
tension cords that are designed for outside use.
• Make sure that the switch is in the ‘off’ position
when plugging in the machine.
• The machine is started by pressing the green or I
button, and is switched off by pressing the red or
0 button.
• Once the machine is on, wait until the motor
speed stabilizes (2 or 3 seconds) before starting
to cut.
3. SAFETY INSTRUCTIONS
WARNING
!
Important! When using electrical apparatus, ob-
serve the following safety measures in order to re-
duce the risk of electric discharge, injuries and fire.
Read and observe all these instructions be-
fore using the machine and keep these in-
structions somewhere safe!
KEEP THESE INSTRUCTIONS
SOMEWHERE SAFE
3.1 Keep your workplace tidy
• An untidy workplace increases the risk of acci-
dents.
• Keep the workplace well lit.
3.2 Consider working environment
• Do not expose the machine to rain.
• Do not use the machine in a wet or damp envi-
ronment. Make sure that the workplace is well lit.
• Do not use the machine near to inflammable liq-
uids or gasses.
3.3 Keep children away!
• Do not let other people touch the machine or ca-
ble. Keep them away from your workplace.
3.4 Store your tools in a safe place
• Machines that are not being used should be
stored in a dry, safe place that is out of reach of
children.
3.5 Use the right machine
• Do not use the machine for jobs that it was not
designed for.
70
70